Servo- Motion

by Vadim | Comments Off

Servo

homeServo

Servo Drive & Motors

Servo Made Simple. Eliminate Complexity.

The Hardware:
• Drives: single and three-phase, robotic cables available
• Wide servo power range – 50W to 5,000W (0.06-6.7 HP)
• Motors: to suit any machine size; robust, built-in high-resolution serial encoders (absolute: 23-bit , incremental: 20-bit), IP65
• Built-in communications: EtherCAT1 or CANopen

The Software:
UniLogic Software Eliminates the complicated operations associated with Motion Control.

• Servo drives and Motors: simple setup
• Ready-made code: implement Motion in 2 clicks
• Motion Control programming: drag & drop function blocks
• Control up to 8 Axes • One-parameter tuning • Built–in Diagnostic tools

No motion programming knowledge needed.

UniStream Series & UniLogic Software Benefits:

Ready-Made Motion Code – Get moving immediately – No programming needed.

Servos, Motors, PLC, HMI – Instant Integration -Absolutely seamless
Communications – Totally transparent, automatic setup and management
Easy Operation
Ready-Made Motion Code
Get moving immediately – No programming needed!
Download Ready-Made Motion code and tap a panel – even mobile – to:
– Set motion parameters
– Monitor Axis behavior and I/Os
– Execute movements, such as Point-to-Point, Jog, and Homing
Minimizes Error: UniLogic software analyzes mechanical properties and recommends safe values for your application
Diagnostics: View servo run-time performance via UniLogic’s built-in powerful, high-speed scope
Tune your system: Using only one single parameter

Vision Series & VisiLogic Software Benefits:

Enhanced Vision controllers and VisiLogic make motion easy:

Communications: Automatic setup, absolutely seamless integration
Easy Operation
VisiLogic software supports unit conversion
VisiLogic is supplied with a simple sample application – Adapt to your specific needs and get moving!
Motion programming is easy, via VisiLogic’s Motion FBs – PLCopen compliant!

Complete Control Solution - with Servo made Simple

Hardware

Hardware

Drives: 1 and 3-phase, robotic cables available
Wide servo power range – 50W to 5,000W (0.06-6.7 HP)
Motors: to suit any machine size; robust, built-in high-resolution serial encoders
(absolute: 23-bit , incremental: 20-bit), IP65
Built in communications – EtherCAT or CANopen

UniLogic® Software Makes Motion Control Simple

Servo drives and Motors: Simple setup
Instant Integration: Absolutely seamless
Communications: Totally transparent, automatic setup
Ready-made code: Get moving immediately!
Motion Control programming: Drag & drop PLCopen-compliant function blocks
Control up to 8 Axes
One-parameter tuning

VisiLogic® Software Makes Motion Control Simple

Servo drives and Motors: Simple setup
Instant Integration: Absolutely seamless
Communications: Totally transparent, automatic setup
Motion Control programming: Drag & drop PLCopen-compliant function blocks
Control up to 3 Axes
Sample VisiLogic application: Adapt it to your needs, and get moving!

Table Download

Product Offering

File NameDownload File

Servo DrivesDownload

Motor Specification

File NameDownload File

Motor SpecificationDownload

Servo Drive Dimensions

File NameDownload File

Servo Drive DimensionsDownload

Drive Specification

File NameDownload File

Drive SpecificationDownload

Products Designation

File NameDownload File

Products DesignationDownload

Ethercat

File NameDownload File

UAC-01EC Install GuideDownload

UAC-01EC SpecificationDownload

EtherCAT BrochureDownload

File NameDownload File

UAC-01EC Install GuideDownload

UAC-01EC SpecificationDownload

EtherCAT BrochureDownload

Document Download

User Manual

File NameDownload File

User ManualDownload

Accessories

File NameDownload File

AccessoriesDownload

2D Drawings

File NameDownload File

UMM-B2 & UMM-B3: Motor DimensionsDownload

UMM-B4: Motor DimensionsDownload

3D Drawings

File NameDownload File

EtherCAT Servo Drives- 3DDownload

CANopen Servo drives- 3DDownload

B4 Servo motors- 3DDownload

B3 Servo motors- 3DDownload

B2 Servo motors- 3DDownload

Success story

Coating Systems International manufactures equipment to apply pill coats to pharmaceutical tablets...

“I have used PLCs for over 20 years, but since using Unitronics, with their large range of choices, I will not need to look for any other PLC manufacturer for any of our many and varied projects.”

“The environment for Servo operation and programming is intuitive and easy to use. We were concerned that this project would require a great deal of time – but Unitronics really has made Servo motion simple. “

Zdorovye is a Ukrainian pharmaceutical company, manufacturing a range of medicinal products...

Hakon Freyr Freysson, Hovendak Distillery’s CEO was happy he selected Unitronics PLC controllers, saying: “Great products, easy to use, competitive prices, wide range of models! It was really easy to implement the Unitronics PLC into our system because the hardware and software are both truly user-friendly.”