Number: Type: Description:

HMI

Type	Description
Error	This application contains more than 255 Displays.
Error	VariableXXX is not supported: (V290 does not support List Keypad Entry Variables.)
Error	Shape Graph, not supported by V120-12.
Error	Moving Image, not supported by V120-12.
Error	VariableXXX is not supported: (V120-12 does not support Text Keypad Entry Variables.)
Error	This Display contains more than 24 Variables.
Error	UTC variable: " VariableXXX " - Vector length exceeds operand range.
Error	The variable: " VariableXXX " contains more then 255 elements.
Error	The Shape Graph variable: " VariableXXX " does not meet the minimum size requirement, 32 pixels per side.
Warning	The variable: " VariableXXX " is NOT aligned to display grid; align to grid optimizes var display.
Warning	The Numeric variable: " VariableXXX " is using a font with missing numeric charecters.
Warning	The text field: XXX is too small to contain its data
Warning	The variable: " VariableXXX " is too small to contain the variable data.
Error	Error In Jump: X - No jump condition was set for : DisplayXXX
Error	Error In Jump: X - No destination Display was defined for the Jump.

Ladder

Number	Type	Description
39	Error	Mismatched register types, Num To ASCII.
37	Error	NUM to ASCCI linked to Float, not supported by V120-12.
37	Error	ElementXXX: not supported by V120-12, compatible with all other models
35	Error	Vector length exceeds operand range.
34	Error	Vector length value must be grater than 1.
33	Error	Missing Ethernet Com Init; Ethernet port will not be initialized.
40	Warning	Ethernet Card Init present, but Set PLC Name not in project.
44	Error	The transitional contact cannot function in this context.
38	Error	Illegal Element on interrupt subroutine – ElementXXX.
38	Error	Net is too complex for Interrupt subroutine.
38	Error	Timer cannot be included in Interrupt subroutine.
38	Error	Interrupt subroutine not supported by V120-12, compatible with all other models.
27	Error	Call to none existing Display.
41	Error	Track Events vector cannot exceed 256 MBs in length.
36	Warning	Configuration FB not included in Main Routine. Program may not run correctly.
32	Warning	Missing output Element - Net will not be compiled.
23	Error	The FB configuration used by this operation has been deleted.
42	Error	Main FB element (Config/Scan) cannot be in disabled net.
31	Error	This Element - Data Table link is no longer valid or no longer exists.

Number	Type	Description
703	Error	Missing Snap-in I/O definition.
704	Error	???
700	Warning	Duplicate link for OperandTypeXXXOperandAddressXXX
701	Warning	ElementModelXXX , High speed input I <p>,<p> - counter mode must be filled
701	Error	ElementModelXXX, high speed output, All H.S Outputs must be linked to same Frequency operand.
705	Error	The defined hardware configuration does not support immediate input <p>
705	Error	The defined hardware configuration does not support immediate output <p>
705	Error	Immediate function cannot be linked to MB memory type.
705	Error	The defined hardware configuration does not support immediate analog output OprndPowerUpXXX
705	Error	The defined hardware configuration does not support immediate high speed input <p>,<p>
702	Warning	The defined hardware configuration does not support Input <p>
702	Warning	The defined hardware configuration does not support Output <p>
706	Error	Missing addresses for Load Cell element.
707	Error	Interrupt subroutine for HSC is not supported by the defined hardware configuration

Download

Number	Type	Description
987	Warning	Incompatible hardware configuration definitions: between project ( PCModelXXX) & PLC ( PLCModelXXX).

Function Blocks

Number	Type	Description
22	Error	Function Block requirements have exceeded RAM capacity.
21	Error	The legal number of configured FBs has been exceeded.
756	Error	The RT Files not exist for the Function Block FatherNameXXX.
756	Error	Topic (FB) overflow.
755	Error	The O/S in this PLC is outdated, and does not support the Function Block.