Power-up Values

Power-up values can be assigned to most operands.  These values are written into the operands when the controller is turned on.

Bit operands can be SET or RESET.  Integers, Long Integers, and Double Words can be assigned values that are written into the operand at power-up.

You can assign Power-up Values in the:

• Select Operand and Address Dialog Box

  Check the box next to the plug-shaped icon.  This enables you to enter a value in the Power-up value fill-in field.

  

• Operand View Window

  1. Select the Operand tab at the bottom of the screen.

  2. Click on the Operand type to display the list of operands.  

  3. Enter Power-up values in the column headed by the Power-up icon.