Located on the COM menu, this function enables you to assign a unique ID number to a PLC. This name can, for example, be used to identify the PLC for CANbus or RS485 networking purposes.
This should be assigned as a power-up task.
|
Notes ♦ |
When the function is activated, the ID is written into the PLC. If the value is supplied via Indirect Vector, note that simply storing a value into the vector will not rewrite the ID. To rewrite the ID, the value must first be stored in the appropriate vector, and then the function must be activated. |
|
♦ |
This feature is not supported by the V120-12 series. |