LF: Modify Alarm From CSV

Use this function to change the Alarms settings located in an SD FolderSD Folder using a CSV file.

SD Folder Paths

Data Type	Folder	Syntax
Data Tables	DT/	/DT/filename.ext
Audio	Media/Audio/	/Media/Audio/filename.ext
Video	Media/Video/	/Media/Video/filename.mp4
Docs	Media/Docs/	/Media/Docs/filename.ext
User Logs	UserLogs/Bin/	/UserLogs/Bin/filename.bin
	UserLogs/Csv/	/UserLogs/Csv/filename.csv
	UserLogs/Txt/	/UserLogs/txt/filename.txt
Screenshots	Media/Screenshots/	/Media/Screenshots/filename.jpg
User Logs	UserLogs/	/UserLogs/filename.ext

	Parameter Name	Purpose
A	SD Folder Path	Link a tag and enter the path as a power-up value, or enter a value into the tag at run-time.
B	CSV File Name	This is the name of the CSV file. Assign a Data Tag or enter a constant. The name may not exceed 63 characters.
C	Status	0 = No Error 1 = Operation accepted 2 = Operation in progress -1 = ID of alarm does not exist -2 = Contact support -3 = No such folder exists -4 = Internal error, send request again